Shipping
- 20GP container
- 6 machines
- 40HQ container
- 30 machines
Ships in 8–30 working days from order. Loading figures are approximate; we confirm the plan with your order.
Containers and paperwork
MINI SKID STEER LOADER
BL-T360-HTracked Stand-on Mini Skid Steer Loader
TTracked360Size classHHand · stand-onHow model names work
- Rated load
- 200 kg
- Bucket capacity
- 0.15 m³
- Engine power
- 7.6 kW
Or message usWhatsApp +86 158 5249 9415info@boblift.com
- 12‑month whole-machine warranty
- Ships in 8–30 working days
- Order from 1 unit
- Shipping & warranty
- Catalogue PDF · 5.5 MB
Confirm your configuration and current availability with our team.
BL-T360-H overview
A CLOSER LOOK
AT YOUR NEXT MACHINE.
BL-T360-H product film
Watch it work 6 videos
The BL-T360-H is the smallest mini skid steer loader in the BOB-LIFT range, and at 930 mm the narrowest; its 906 mm bucket sits within that width. That width is the reason to choose it: it passes garden gates, side passages and doorways that rule out larger loaders. It suits landscapers, gardeners and small renovation crews moving soil, gravel and rubble in tight spaces.
Rubber tracks spread its 650 kg over lawns and soft soil, and it is rated for slopes up to 30°, shared with the BL-T460-H as the steepest in our loader range. The operator stands on the rear platform and drives with joysticks. Each 0.15 m³ bucket is rated at 200 kg, and it lifts up to 300 kg. A single-cylinder engine runs on petrol or diesel: KOOP (7.6 kW), Rato (7.9 kW) or Briggs & Stratton (9.92 kW).
When the opening is over 1.1 m wide, look at the BL-T460-H stand-on mini skid steer loader. It has the same 0.15 m³ bucket capacity, a two-cylinder 15–17 kW engine and a 300 kg rated load. Pick the BL-T360-H when the narrowest point on your site decides the machine.
- 930 mm wide
The narrowest loader BOB-LIFT builds, for gates, side passages and tight yards.
- 650 kg on rubber tracks
Spreads its weight over lawns and soft soil, rated for 30° slopes.
- Petrol or diesel
KOOP, Rato or Briggs & Stratton single-cylinder engines.
BL-T360-H specifications
KNOW YOUR
MACHINE.
Figures from the BOB-LIFT technical sheet supplied for this range. Confirm the final specification before ordering.
Engine brand, attachments and configuration are set per order. Tell us your preferred engine and the work you have in mind.
Compare every loaderPerformance
- Rated load
- 200 kg
- Lifting capacity
- 300 kg
- Bucket capacity
- 0.15 m³
- Max travel speed
- 6 km/h
- Hydraulic pressure
- 17 MPa
- Gradeability
- 30°
- Machine weight
- 650 kg
Build
- Running gear
- Rubber tracks
- Operator station
- Stand-on platform
- Controls
- Joystick operation
- Body material
- Manganese steel
- Bucket material
- Manganese steel
Details
- Power by engine
- KOOP 7.6 kW / Rato 7.9 kW / Briggs & Stratton 9.92 kW
Engine
- Engine options
- KOOP / Rato / Briggs & Stratton
- Engine power
- 7.6 kW
- Engine type
- 1-cylinder, 4-stroke
- Fuel
- Petrol / diesel
- Fuel tank
- 5 L
- Starting
- Electric start
- Emission standard
- EPA Tier 4 / EU Stage V
Dimensions
- Working height
- 1,650 mm
- Max dumping height
- 1,340 mm
- Height with arms raised
- 2,230 mm
- Length with bucket
- 1,906 mm
- Length without bucket
- 1,466 mm
- Machine width
- 930 mm
- Bucket width
- 906 mm
- Overall height
- 1,226 mm
- Ground clearance
- 160 mm
Attachments for the BL-T360-H
ONE LOADER.
MANY JOBS.
The bucket comes off the quick-attach plate and a fork, auger or breaker goes on. These attachments suit this loader's work; we confirm each one against its hydraulic flow when we quote.
See all 26 attachments
4-in-1 bucketDig, grab, level and doze
Pallet forksPallets, bagged cement, bales
AugerHoles for posts and planting
Hydraulic breakerConcrete, paving and frozen ground- TrencherNarrow trenches for cables and pipes
- SweeperYards, roads and light snow
How the BL-T360-H is built and checked
MADE AND CHECKED
IN OUR FACTORY.
Every loader is welded, painted and assembled in our own workshops in Xuzhou, Jiangsu, then run and checked before it is packed for export.
See how our loaders are made
Frames welded on the fabrication floor 
Assembled one station at a time 
Painted to order and ready to ship
- 01Check before start-up
Before starting the engine, we inspect the fuel tank and all pipework.
- 02Run and travel test
We run the engine and operate every movement, then drive the machine to test the travel system.
- 03Leaks, cooling and final check
We look for oil leaks, shut the machine down, inspect the cooling and finish with a last pipework check.
Shipping, warranty and documents
FROM OUR FLOOR
TO YOUR SITE.
How the BL-T360-H reaches you, and what happens after it arrives.
How buying worksWarranty and parts
12 months
The whole machine is covered. Send the model, serial number and a photo or video, and our team guides the fix and ships the parts.
Warranty and serviceDocuments
All downloadsQuestions about the BL-T360-H
ASKED &
ANSWERED.
Not answered here? Ask the team that builds the machines.
More questionsWhich attachments suit this loader?
Most attachments mount on the quick-attach plate and run from the auxiliary hydraulic lines. Hydraulic flow differs from model to model, so we confirm which attachments suit this loader when we quote it.
See all attachmentsCan I choose the engine and the colour?
Where the specification lists more than one engine under Engine options, you choose one when you order. Loaders are painted to order, so tell us the colour you want.
How is the loader shipped?
By sea in a 20GP or 40HQ container. A 20GP takes six of our 360, 390, 460, 490 or 750 sizes, or four of the 1000 size. A 40HQ fitted with loading racks takes up to 30 of the 360 size, 22 to 24 of the others, or 10 of the 1000 size. Attachments change the plan, which we confirm with your order.
Container loading for every modelWhat happens if something goes wrong?
Send us the model, the serial number and a photo or short video. Our team guides the fix remotely and ships the parts you need under the whole-machine warranty.
Warranty and partsRequest a quote for the BL-T360-H
LET’S FIND
YOUR FIT.
Tell us where the machine will work and what it needs to do. We reply with a quotation, the configuration we suggest and the shipping plan.
- WhatsApp+86 158 5249 9415
- Emailinfo@boblift.com
- Rated load
- 200 kg
- Bucket capacity
- 0.15 m³
- Engine power
- 7.6 kW
Enquiring about: BL-T360-H Tracked Stand-on Mini Skid Steer Loader
EXPLORE YOUR OPTIONS
MORE FROM THE RANGE.
GUIDES AND NEWS
READ BEFORE YOU BUY.
Mini Skid Steer Bucket Size, Capacity and Which Type to Use
Mini skid steer bucket guide: 0.1–0.19 m³ (3.5–6.7 ft³), 906–1,270 mm wide, what a full bucket of soil, sand or gravel weighs, and which type to use.
Read the story
Mini Skid Steer vs Compact Track Loader: Size and Capacity
Mini skid steer vs compact track loader: how weight, size class and rated operating capacity differ, how ISO 14397-1 sets ratings, and where each one fits.
Read the story
Mini Skid Steer Weight and Dimensions: Gates, Trailers, Shipping
Mini skid steer weight and dimensions for nine BOB-LIFT loaders: 650–1,250 kg, 930–1,090 mm wide. Check gates, trailers, lift height and container loads.
Read the story