BOB-LIFT websites
boblift.comBOB-LIFTThe company, its factory and the full range
bobliftcrane.comCranesTruck-mounted, marine and pickup cranes
bobliftloader.comLoaderMini skid steer loaders and mini dumpers
You are here BL-T360-H / BL-T460-H stand-on mini skid steer loaders
More than looks.
Scroll down into every detail.
The 3D model is built from factory drawings;
the photos show the same machine.
Scroll down and thirteen assembly groups separate along their factory assembly directions.
Click a part label to compare it with photos of the same spot.
Scroll to a part on the left and the model on the right focuses on it, fading the rest; thumbnails open photos of that part.
Welded steel bucket, joined to the lift arms through the quick-attach plate and tilted by the front cylinders.
The quick-attach plate locks the bucket to the front of the arms; hydraulic quick couplers beside it make changing attachments easy.
The arms pivot up about the rear frame pins, the lift cylinders on both sides extend with them, and the hoses run along the arms.
Twin joysticks, one on each side, with a clear grip position; the gauge, key and battery isolator sit within the standing operator’s view, and a loop handrail runs around the controls.
The engine sits at the rear, with its fan shroud, air filter and oil cooler under the hood.
The fuel tank, hydraulic tank and battery are mounted inside the frame; the hydraulic tank has a sight glass on its side.
The welded frame carries every assembly and the slotted hood lifts for service; the rear standing platform has a raised anti-slip pattern, designed from its surface to its edges for all-day standing.
Steel track frames are mounted under the main frame, with rubber tracks wrapped around the drive sprockets and rollers.
The arms pivot up about the rear pins, the cylinders extend and retract with them,
and the bucket tilts at the front. Scroll or drag the slider to watch a full cycle.
The arms rise as the lift cylinders extend.
The tilt cylinders push out and the bucket tips about its front pivot.
The bucket curls back and the arms return to the start.
A compact body fits down side passages and into yards,
grading, backfilling and moving paving materials close to the ground.
Between buildings, in basements and behind hoardings,
it loads bulk material and debris onto trucks.
Around barns, pens and yards,
bucket curled, it brings feed and bedding where they’re needed.
Scenes and tasks reflect typical uses of compact stand-on tracked loaders, not specific customer projects; poses are illustrative.
The BL-T360-H: single-cylinder, 7.6 kW, 930 mm wide, 200 kg rated load. The BL-T460-H: twin-cylinder, 16.8 kW, 1,090 mm wide, 300 kg rated load.
| Model | BL-T360-HSingle-cylinder | BL-T460-HTwin-cylinder |
|---|---|---|
| Performance | ||
| Rated load | 200 kg | 300 kg |
| Lifting capacity | 300 kg | 375 kg |
| Bucket capacity | 0.15 m³ | |
| Max travel speed | 6 km/h | |
| Hydraulic pressure | 17 MPa | |
| Gradeability | 30° | |
| Machine weight | 650 kg | 730 kg |
| Engine | ||
| Engine options | KOOP / Rato / Briggs & Stratton | Zongshen / KOOP / Rato / Briggs & Stratton |
| Engine power | 7.6 kW | 16.8 kW |
| Engine type | 1-cylinder, 4-stroke | 2-cylinder, 4-stroke |
| Fuel | Petrol / diesel | |
| Fuel tank | 5 L | 10 L |
| Starting | Electric start | |
| Emission standard | EPA Tier 4 / EU Stage V | |
| Dimensions | ||
| Working height | 1,650 mm | |
| Max dumping height | 1,340 mm | |
| Height with arms raised | 2,230 mm | |
| Length with bucket | 1,906 mm | 2,200 mm |
| Length without bucket | 1,466 mm | 1,855 mm |
| Machine width | 930 mm | 1,090 mm |
| Bucket width | 906 mm | 1,100 mm |
| Overall height | 1,226 mm | 1,267 mm |
| Ground clearance | 160 mm | |
| Build | ||
| Running gear | Rubber tracks | |
| Operator station | Stand-on platform | |
| Controls | Joystick operation | |
| Body material | Manganese steel | |
| Bucket material | Manganese steel | |
| Details | ||
| Power by engine | KOOP 7.6 kW / Rato 7.9 kW / Briggs & Stratton 9.92 kW | Zongshen 17 kW / KOOP 15 kW / Rato 16.8 kW / Briggs & Stratton 17 kW |
Figures are the published specifications on each model’s product page. Engine brand and fuel depend on the chosen configuration; the machine as delivered is definitive.
After the details, the whole machine.
Custom colors available on request
The BL-T360-H: single-cylinder, 7.6 kW, 930 mm wide, 200 kg rated load. The BL-T460-H: twin-cylinder, 16.8 kW, 1,090 mm wide, 300 kg rated load.
